Home / Products / Roof vents (attic ventilators) / AirM300, flat roof base

Roof vents (attic ventilators)

AirM300, flat roof base

Insulated base against condensation

AirM300, flat roof base, flat roof ventilator
144sq. in.

Net free ventilating area (NFVA), 12 x 12 in. model

Estimated airflow: ≈ 410 CFM, calculated from the NFVA (not laboratory measured).

Passive roof vent that exhausts air from attics and roof cavities on flat roofs. In winter, warm, humid exhaust air meets the cold walls of the base. Without insulation, moisture condenses there, then drips into the attic or freezes. The built-in insulation keeps the inner wall above the dew point and reduces the thermal bridge between the roof and the vent.

  • Made in 5 days
  • Colour matched
  • Canadian steel
  • Custom sizes
  • Tested to CAN3-A93-M82

Get a quote for this product(450) 441-1226

Need a custom size? Enter your dimensions in the quote request or call a technical advisor.

Applications

Available colours

Made from prepainted steel in the Ideal Roofing, Vicwest, MAC, Agway Metals and Color Steels palettes, or matched from a sample.

See the colours in stock →

Installation

  • Installed by a professional roofer or contractor, following good roofing practice. This is a condition of the warranty.
  • Weatherproofing around the product (flashing, membranes, sealants) is the installer’s responsibility.
  • Detailed installation guide: in preparation. In the meantime, our technical advisors answer roofers at (450) 441-1226.

Technical documentation

Technical specifications : AirM300, flat roof base
Technical specifications
Estimated airflowapprox. 410 CFM (12 x 12 in.)
Standard opening12 x 12 in.
Available sizes8 x 8 in. and up
BaseInsulated, anti-condensation
MaterialG90 galvanized steel, 26 ga and 24 ga
FinishPrepainted steel
ScreenBuilt-in perforated steel rodent-resistant screen
Wind protectionWind deflector
NFVA (12 x 12 in.)144 sq. in.
Test standardCAN3-A93-M82 (R2003)
LaboratoryUL Canada (ISO/IEC 17025 accredited)

Sizes and dimensions

Sizes and dimensions : AirM300, flat roof base
GaugeModelA Base widthB Overall heightC Cap widthNFVAEst. CFM
26 ga12 x 12 in.12 in.18 in.19.6 in.144 sq. in.approx. 410
26 ga14 x 14 in.14 in.20 in.21.6 in.196 sq. in.approx. 558
26 ga16 x 16 in.16 in.20 in.23.6 in.256 sq. in.approx. 663
26 ga18 x 18 in.18 in.23 in.25.6 in.300 sq. in.approx. 783
24 ga20 x 20 in.20 in.32 in.35.2 in.400 sq. in.approx. 1,139
24 ga22 x 22 in.22 in.36 in.37.2 in.484 sq. in.approx. 1,378
24 ga24 x 24 in.24 in.36 in.39.2 in.576 sq. in.approx. 1,640

CFM figures are estimates calculated from the net free ventilating area (NFVA). Limited lifetime warranty on manufacturing defects, 10 years on paint.

Tested to CAN3-A93-M82 (R2003) by UL Canada, an ISO/IEC 17025 accredited laboratory. These are performance tests to the standard, not a product certification.

In the same category